Power Phase ConverterBZT-30KW 240Vac to 380Vac Static Phase Converter

BZT-30KW 240Vac to 380Vac Static Phase Converter

       BZT series Power phase converter, adopted AC-DC-AC circuit structure and SVPWM modulation control technology, which can convert ordinary single-phase power to industrial three-phase power. Two phase to three phase ,3 phase to 3 phase and so on.After through BZT series power phase converter power conversion, the output is standard pure sine wave, the harmonic distortion rate (THD) is less than 2%, totally meet the national standards power quality, applicable to all types of load.

Technical Features:

1) Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.

2) Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.

3) Pure sine wave output with good transient response less than 50ms, waveform distortion is very little, higher conversion efficiency and stable output voltage.

4) Adopted low frequency transformer which ensure the input voltage and output voltage are completely electrical isolated to avoid interference.

5)Using the SVPWM space vector algorithm, high conversion efficiency, high instantaneous power and low no-load loss conversion efficiency can reach more than 94%, no-load loss is small.

6) Output AC Power is suitable for all types of electric appliances, electric tools, electric motors etc. higher capability of driving load.

7) Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices.

8) Output perfect protection function, with output over-voltage, overload, short circuit, over temperature, self-diagnosis protection and other protection.

9) High conversion efficiency, high instantaneous power and low load loss.

10) The input voltage, output voltage, frequency and phase can be custom made.

11) DC input optional.

3.jpg

Model

BZT-30KW

Isolation mode

Low Frequency Transformer

AC Input

Input rated voltage (Vac)

single phase 240V

Input rated voltage range

110/120/220/230/240V/380V/415V/440V/480Vac optional

Input rated current(A)

125A

AC Output

Rated output power

30KW

Output waveform

Pure sine wave

Phases

Three phase, 4 wire

Output rated voltage

380VAC ±3%

Output voltage range

220/380/400/415/440/480Vac optional

Output rated current

45A (phase current)

Output Frequency

50Hz/60Hz±0.05Hz

Power Factor(PF)

1

Overload Ability

150%, 10s

Efficiency

>92%

Waveform distortion rate (THD)

Dynamic Response (0 to 100% load)

 5%,≤50ms

Display

LCD

Running mode

Working continuously

Electrical insulation properties

2000Vac, 1 Minute

Protection function

Protection

Input under voltage, over voltage, output over-current, short circuit, overheating etc.

Cooling method

Fan-cooled

Short-circuit protection

No automatic recovery, need to restart the machine

Working environment

Ambient temperature

-25~+55℃

Using environment humidity

0~90%,No condensation

Noise ( 1 meter)

≤50dB

Degree of protection

IP20(indoor)or IP45(Outdoor)

Using altitude(m)

≤2000

Dimension (mm)

600x700x1080mm

Back to homepage

WhatsApp
+8618969760766
+8613676592638

Skype
lily.zhang97
13676592638

在线客服