Low Frequency Pure sine wave InverterBZP-30KW split phase/3 phase output inverter built in AC generator input

BZP-30KW split phase/3 phase output inverter built in AC generator input

Bangzhao pure sine wave series inverter is one of the most advanced DC to AC conversion products in the world, it has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is simple, stable, no noise and no pollution. It is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine etc. The inverter can also supply AC voltage to all kinds of power tools, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other power supply.

The inverter output waveform is pure sine wave; this kind of AC power is suitable for most industrial electronics and home appliances, the power supply features much better than other modified sine wave and square wave.

2.jpg

Technical Features:

1, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the nature of their load.

2, The output frequency can be set, this function is very convenient for customer.

3, The output voltage can be set between +20 % to -40 % of rated voltage. It’s a great convenience to users.

4, The DC input voltage range can also be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be set via the LCD panel. Convenient for increasing or reducing the quantity of batteries, photovoltaic modules also can be used flexibly.

5, Pure sine wave output. with good transient response less than 40MS, little harmonic distortion, higher conversion efficiency and stable output voltage.

6, Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.

7, Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.

8, Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-400V or 400-850V.

9, Product have passed the European CE (EMC and LVD) certificated and accredited by Australia CEC energy network.

3.jpg

Technical Data

Model

BZP-30KW

Isolation

Low Frequency Transformer

DC Input

Input rated voltage(VDC)

192V

360V

Input rated current(A)

156A

125A

AC Input

Input rated voltage(VAC

240V

380V

AC Output

Rated AC output power

30KW

AC output waveform

Pure sine wave

Phases

120/240V Split-Phase

Three-Phase

Output rated voltage               

240VAC ±3%

380VAC±3%

Output Frequency

50Hz/60Hz±0.05Hz

Output rated current(A)

125A

45.5A (phase current)

Power Factor(PF)

1

Overload Ability

150%, 10s

Efficiency  

≥94%

Waveform distortion rate (THD)

Crest Factor (CF)

3:1

Display

LCD

Electrical insulation properties

2500Vac, 1 Minute

Ambient temperature

-15~+55℃

Using environment humidity

0~90%,No condensation

Protection

Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.

Cooling method

Fan-cooled

Noise

Degree of protection

IP20(indoor)

Using altitude(m)

≤2000

CE Standard

EN60950-1:2006+A11:2009, EN61000-6-4:2007+A1:2001, EN61000-6-2:2005, EN61000-3-12:2005, EN61000-3-11:2000

Back to homepage

WhatsApp
+8618969760766
+8613676592638

Skype
lily.zhang97
13676592638

在线客服